How to Assemble Your AKRacing Gaming Chair: Step-by-Step Guide

Quick Answer

Assembling an AKRacing gaming chair typically takes 20 to 40 minutes. The process involves attaching the base, casters, gas lift, seat mechanism, backrest, armrests, and headrest cushion in sequence. All required tools are included in the box - no additional hardware is needed.

What's in the Box and Pre-Assembly Prep

Before you start, unbox all components and lay them on a clean floor with space to move around. A standard AKRacing chair box contains: the seat base (main cushioned seat unit), the backrest, the star-shaped base, five caster wheels, the gas lift cylinder, the tilt mechanism plate (pre-attached in some models), two armrests, the headrest pillow, the lumbar support cushion, a bag of bolts, and an Allen key. Check every item against the parts list in the manual before beginning - missing hardware should be reported before assembly.

Tip: place the seat upside down on a soft surface (the box flap works well) during armrest installation to avoid scratching the seat material.

Step-by-Step Assembly Instructions

Step 1 - Attach the casters. Press each caster wheel firmly into the five holes in the star base. They click into place and require no tools.

Step 2 - Insert the gas lift. Slide the narrow end of the gas lift cylinder into the centre hole of the star base. It sits loosely at this stage - gravity and body weight will secure it once assembled.

Step 3 - Attach the tilt mechanism to the seat base. Flip the seat upside down. Align the tilt mechanism plate over the four bolt holes on the underside of the seat. Insert and tighten the four bolts using the included Allen key. Do not fully tighten until all four bolts are threaded to prevent misalignment.

Step 4 - Attach the backrest. Stand the seat upright. Align the backrest mounting brackets with the side mounts on the seat. Insert the bolts and tighten - these usually require firmer tightening than the mechanism bolts.

Step 5 - Attach armrests. Slide each armrest into its slot on the seat base and secure with the provided bolts.

Step 6 - Mount the seat onto the gas lift. Lift the assembled seat and place the tilt mechanism socket firmly onto the top of the gas lift cylinder. Press down firmly - it should seat securely.

Step 7 - Attach the headrest and lumbar cushion. Loop the headrest strap over the top of the backrest and secure. Position the lumbar cushion at lower back height using its strap.

For gaming chair options in South Africa including AKRacing models, Evetech stocks the full range.

Frequently Asked Questions

How long does it take to assemble an AKRacing gaming chair? Most users complete assembly in 20 to 40 minutes working alone. Having a second person help hold the backrest during mounting reduces this to around 15 minutes.

What tools do I need to assemble an AKRacing chair? All necessary tools are included in the box. An Allen key (hex wrench) is provided. No power tools or additional hardware are required.

My AKRacing chair feels wobbly after assembly - what should I check? Check that all backrest bolts are fully tightened and that the gas lift is fully seated into the star base. A loose backrest or poorly seated gas lift are the two most common causes of wobble after assembly.