How to Fix Screen Tearing After an AM5 Motherboard Upgrade

AM5 motherboard upgrade screen tearing often comes from changed drivers, BIOS settings or display output paths. Check chipset drivers, GPU seating, refresh rate, VRR and frame caps before assuming the new board is faulty.

Build Lab · 30 Jun 2026 · 2 min read · ChipChaser ·

Quick Answer

Screen tearing on a AM5 build happens when the GPU presents frames out of step with the monitor refresh cycle. The fix is in the display sync path: GPU, driver, cable, monitor refresh and in-game frame cap. Enable FreeSync or G-Sync Compatible, set the correct Windows 11 refresh rate, use DisplayPort where possible, and apply a cap matched to the monitor refresh rate.

Confirm Refresh Rate

Open Windows Settings, System, Display, Advanced display and make sure the monitor is running at its advertised refresh rate. A 240Hz screen left at 60Hz will feel rough even with a fast RTX 5070, RX 9070 XT and RTX 5080 build. For 1440p 144Hz, 165Hz or 240Hz, a certified DisplayPort 1.4 cable in the R150-R500 range is often enough.

Turn On VRR Correctly

For Nvidia cards, open Nvidia Control Panel, Set up G-SYNC, enable it for the display, then use Manage 3D settings to keep V-Sync on in the driver. For AMD cards, enable FreeSync in Adrenalin and confirm Adaptive Sync in the monitor menu. Cap frames just below the ceiling: 141 for 144Hz, 162 for 165Hz, 237 for 240Hz.

Upgrade Myths

A motherboard, DDR5 kit, Gen 5 SSD, keyboard, DAC, router or wireless headset does not directly create tearing. Those upgrades may coincide with a driver reinstall, a new cable, a monitor reset or a changed game profile. Check the display chain in order: refresh rate, VRR toggle, cable, GPU driver, fullscreen mode and frame cap.

FAQ

Should V-Sync be on or off for screen tearing?

With VRR, keep V-Sync enabled in the GPU driver and use a frame cap below the monitor limit. Without VRR, V-Sync can remove tearing but may add input lag.