To connect speakers to a TV, find the audio output on the back of the set, match it to an input on your speakers and pick the audio cord for TV that fits both: optical for clean digital sound, or RCA and 3.5mm AUX for analogue. Then change the TV's sound output away from its built-in speakers, or the new ones stay silent.
Quick Answer
Most TVs offer at least one of optical, red and white RCA, 3.5mm headphone out or HDMI ARC. Optical cords cost roughly R80 to R300, RCA and 3.5mm leads roughly R40 to R250. Plug the cord in, set the TV's audio output to match in the sound menu, and select the correct input on the speakers.
🔎 Step 1: Read the back of the TV
Look for these sockets and write down which ones you have:
- Optical (Toslink): a square port, often covered by a small plastic cap that you pull off.
- RCA out: a red and white pair, sometimes labelled "audio out".
- 3.5mm headphone jack: a small round hole, useful for small powered speakers.
- HDMI ARC: a specially marked HDMI port that sends audio to a soundbar or receiver.
Now check the back of your speakers or soundbar. Common inputs are "OPTICAL", "AUX", "LINE IN" and "RCA". Pair one TV output with one speaker input. Optical to optical is the cleanest route if both have it.
🔌 Step 2: Choose the cable
Match the plugs on both ends.
- Optical to optical: one optical lead. Keep bends gentle, since sharp bends can break the light path.
- RCA to RCA: a dual RCA cable from TV out to the amplifier input.
- 3.5mm to 3.5mm: a simple AUX lead from the TV headphone jack to small speakers.
- 3.5mm to RCA: the usual choice when a TV headphone jack feeds an amplifier.
Browse the cable solutions range for each type, and measure the route first. Run the cord along the wall or skirting board, then add a little slack. Optical and analogue cables both handle a few metres in a typical South African lounge without trouble.
⚙️ Step 3: Change the TV's audio output
This is the step most people miss. Open the TV's sound or audio settings and look for "Speaker select", "Audio output" or "Sound output". Change it from "TV speakers" or "Internal" to "Optical", "Audio out" or "External speaker". On some sets the built-in speakers only go quiet after you do this. If you use optical, you may also need to set the digital format to PCM or Stereo for the best compatibility.
🔊 Fixing no sound and hum
If you hear nothing, check these in order:
- The speakers are on the right input.
- The TV output setting is changed, as above.
- The cord is pushed all the way in, with the optical cap removed.
- The TV volume is not muted.
A buzz usually means a mains cable lies against the audio cord, so reroute it. Optical avoids this hum since it carries light. For tidy wiring in the same corner, group the HDMI and power leads on one side and any network cables on the other.
Volume control differs between sets: a variable output lets the TV remote change the volume, while a fixed output keeps a constant level, so you adjust the speakers instead.
A note on soundbars
If you own a soundbar, check whether it has an HDMI ARC socket as well as optical. ARC uses one HDMI lead for sound, and the TV remote then usually controls the bar's volume. You may need to turn on HDMI control in the TV menu for this to work. Optical stays a dependable fallback when ARC misbehaves, and it costs little to keep a spare lead in the drawer.
Frequently Asked Questions
Which output should I use on my TV?
Check the back for an optical port, red and white RCA, or a 3.5mm headphone socket, then match one to your speakers. HDMI ARC suits soundbars.
How do I stop the TV speakers playing too?
Open the sound settings and change the output from internal speakers to optical, audio out or ARC. Some TVs mute their own speakers only then.
Why is there no sound after plugging in the cable?
Usually the TV is still set to its own speakers, or the speakers are on the wrong input. Check both.
Will the TV remote still change the volume?
Sometimes. A variable output lets it, while a fixed output keeps a constant level and you adjust the speakers.
Is optical better than the headphone jack?
Optical is digital and avoids hum near mains wiring. The headphone jack works well for small desktop speakers on a short cord.
How long a cord can I run?
Plan the route along the wall first and add slack. A few metres is comfortable for either type, but avoid sharp bends in optical.
Ready to get proper sound from your TV?
Head to the Evetech cable solutions category to find optical, RCA and AUX cords, and pick the one that matches your TV output and speaker input.