The PC Builder power supply check works by addition. The Evetech PC Builder totals the wattage your chosen parts draw, counting high-TDP processors, and then recommends a unit with the muscle to carry that load. You never have to open a calculator or trust a guess from a forum thread.

Quick Answer

The builder sums the draw of every part on your list and recommends a supply rated well above that sum. A processor with a high TDP raises the figure, and so does a stronger graphics card. Choose the supply last, once the rest of the list is settled, because it depends on every other part.

🔌 What Gets Added Up

A power supply has one job: turn wall power into steady power for every component. The parts that draw the most are the processor and the graphics card, with the board, memory, drives and fans adding smaller amounts.

TDP, short for thermal design power, is a rating of how much heat a chip is designed to give off. It is a rough guide to how much electricity the chip uses under load. A processor rated at 65 W and one rated at 125 W or more are in different classes, and the builder counts the hungrier one accordingly. That is why a hot chip raises the size you are pointed to.

You can see the effect for yourself in the Evetech PC Builder. Choose a modest processor, note the supply it recommends, then swap in a more powerful one and watch the pointer move up. Nothing else changed, so the processor did it.

📐 Why Headroom Matters More Than the Exact Number

Wattage is a ceiling, not a target. A supply that is only just big enough runs near its limit whenever you game or render, which means more heat and a louder fan. A supply with room to spare idles easier and has space for the upgrade you will want next year.

A useful rule of thumb is to aim for a rating that sits 20 to 30 percent above the total draw, and not one that matches it to the watt. A build that draws 400 W, for instance, sits happily on a 550 W to 650 W unit. The builder's recommendation gives you a safe place to start instead of squeezing the margin yourself.

Bigger is not automatically better, though. A huge unit in a modest build costs more and adds no speed. Efficiency ratings also count. Supplies carrying an 80 Plus label have been tested for how little energy they waste as heat, and the label comes in grades such as Bronze, Gold and Platinum.

🧮 Order of Choosing: Last, Not First

Beginners often pick the supply early because it feels like a plain, boring part. That is backwards. The right size depends on the processor, the card, the drives and even how many fans you add in the Looks and Cooling step. If you choose it first, you are guessing; if you choose it last, you are reading an answer.

A realistic sequence takes about 5 minutes at the end of the session: finish every other pick, read the total, then browse the power supply range with that figure in mind. If you later swap a part for a more powerful one, look at the supply again, because the total will have moved.

Cable style is yours to choose. The builder concentrates on raw capacity, and you can pick fully modular, semi-modular or fixed cabling from the supplies it shows. Modular cables keep a case tidier, which helps airflow.

🏆 Spotting a Good Supply

Beyond wattage, look at the efficiency label, the cables it ships with and the connectors your card needs. A graphics card may ask for one, two or three dedicated cables, so count them against the supply before you buy. The best-selling power supplies show which units other builders are trusting.

A supply is also the one part you do not want to cut corners on. It feeds everything else, so a weak unit puts every other component at risk. Spend on a sound supply and treat it as the foundation of the build.

Frequently Asked Questions

How does the builder decide on a wattage?

It adds up the draw of every part you picked, then recommends a unit that leaves spare capacity above that figure.

Why does my processor change the suggested size?

A high-TDP CPU draws more power, and the builder counts it. The hotter the chip, the bigger the unit you will be steered toward.

Should I pick the power supply first or last?

Last. It depends on every other part, so let the builder total the draw and then choose from the units it recommends.

Is a bigger supply always better?

No. You want enough power plus some room, but an oversized unit in a modest build adds cost without adding speed.

What is TDP in plain words?

It is a rating of how much heat a chip is designed to give off, which is a rough guide to how much power it uses.

Will adding a stronger graphics card change the result?

Yes. A more powerful card draws more, so the total climbs and a larger unit moves into view.

Does the builder choose cables or modular type for me?

Cable style is your call. The builder deals in capacity, so choose modular, semi-modular or fixed cabling from the units it shows.

Want the sum done for you? Build your list in the PC Builder and let it total the wattage. Then choose a supply from its recommendation, leaving a little room for future upgrades.