The best ideas for 3D pen projects start flat. Trace a keyring, bookmark or name tag over a printed stencil, peel it off the page, then lay a second layer on top for strength. Once your lines stay steady, move up to phone stands, pencil holders and small animals built wall by wall.
Quick Answer
Begin with a flat traced shape, add a second layer, then try one simple upright stand. A spool of pen or printer filament sits around R249 to R399 and a beginner project uses only a small slice of it. Read your pen's manual for the plastic type and filament diameter it takes, because 1.75 mm is common but not universal.
✏️ Flat projects that teach control
Flat work trains your hand to move at the speed the plastic needs. Print a stencil of a star, a heart or your initials, place it under a sheet of baking paper or a clear plastic sleeve, and trace slowly so the line joins itself without gaps.
- Keyrings and bag tags: draw the outline, fill the middle with tight zigzags, then add a loop at the top.
- Bookmarks: a long thin shape teaches you to keep a straight, even line.
- Coasters: spiral outward from the centre, then add a raised rim as a second pass.
Let each piece cool for a few seconds before peeling. Hot plastic bends and tears, cooled plastic lifts off cleanly. If the shape curls, press it flat under a book while it sets.
🧱 Standing builds once the outlines feel steady
Upright objects are really flat pieces joined at the edges. Draw the front, back and sides separately, let them harden, then glue the seams by running a warm bead along the join.
Three first stand-up projects
- Pencil holder: four rectangles about 8 cm tall joined to a square base. Walls are strong because you can overlap the seams twice.
- Phone stand: a flat base, a back plate and two triangular side supports. Make the groove for the phone about 1 cm wide, and test with the phone case on.
- Small animal figure: a body outline, two cut-out ears and four legs, assembled like a flat-pack toy.
For tall walls, build in short bursts of two or three centimetres and pause. Stacking too fast makes the lower layers sag. A bit of practice with the filament your pen accepts is cheaper than buying several spools of different colours too early.
🧰 Setup, filament and safety
Work on a heat-proof mat, such as a silicone craft sheet, rather than directly on a table. Keep a pair of snips nearby for trimming strands, and a damp cloth to wipe off the tip once the pen has cooled.
Choose a pen with an adjustable temperature setting if children will use it. Low-temperature pens take a softer plastic and are gentler on small hands, but the tip is still hot enough to burn, so an adult should sit beside younger kids. Print in a room with an open window, since melting plastic gives off a smell.
If you find the hobby sticks, a desktop machine is the next step. The 3D printers category shows how hobby machines are laid out, and the skills you build tracing shapes carry over to reading a printed model's layers.
🌧️ Holiday afternoon plans for South African families
A rainy Highveld afternoon or a long school-holiday week is ideal for a pen challenge. Set a theme such as "desk tidy week": Monday keyrings, Tuesday pencil holders, Wednesday phone stands. Kids in Durban or Cape Town homes where the weather turns damp can keep the spools in a sealed tub with a silica sachet, because plastic that has soaked up moisture feels brittle.
Matric and varsity students use pens too, for quick model parts in design projects and for small name plates on res room doors.
Frequently Asked Questions
What is the simplest first thing to draw?
A flat keyring or bookmark traced over a printed outline. It teaches line speed and layering without any need to build walls.
Which plastic should I buy for my pen?
Buy exactly what your manual lists. Pens built for low-temperature plastic and pens built for standard filament are not interchangeable, and the wrong spool can jam the tip.
Can children use a 3D pen on their own?
Younger children should not. The nozzle gets hot, so keep an adult next to them and choose a cooler-temperature setting for first sessions.
How do I stop my lines from looking lumpy?
Move at a steady pace that matches the feed speed, and keep the tip just above the surface. Rushing makes thin, stringy lines and stopping makes blobs.
Can I turn a pen project into a printer project later?
Yes. Printers follow files rather than your hand, but the habit of building in layers and letting parts cool makes printed models easier to understand.
Ready to stock up for your next build?
Browse the 3D printing filament and 3D printer categories on Evetech to see the plastics and machines available for hobby projects.