The fastest way to fix microphone background noise on Windows is to lower the mic gain, move closer to the mic, then add a Noise Suppression filter followed by a Noise Gate in OBS. Software can soften hiss and hum, but it cannot rescue a mic that hears the whole room, so the physical fixes come first.
Quick Answer
In OBS, right-click your mic source, choose Filters, then add Noise Suppression, Noise Gate and Gain in that order. Set the gain so your voice peaks around the middle of the meter and keep the mic a hand's width from your mouth. A better mic position often removes more noise than any filter, and a close-pickup dynamic mic at around R800 to R2,500 helps in a noisy home.
🎚️ Start with gain and distance
Noise gets louder every time you raise the gain. If your voice is weak, move the mic closer before touching the level. A distance of about a hand's width from your mouth lets you keep gain low, and low gain means less hiss and less room.
In Windows, open Settings, System, Sound, pick your mic under Input and open its properties. Set the input volume so your speech sits in the middle of the meter. If the level meter jumps when nobody is talking, you have found a noise source: a fan, a charger, a screen or a loose cable.
Move the mic away from fans, laptop vents and power adapters. Even a small shift of a metre can drop the hiss noticeably.
Cable position matters as well. A USB cable lying beside a phone charger or a power strip can pick up a faint buzz, so route it away from mains leads. If the hum stays, plug the mic into a different USB port, preferably one directly on the PC and not on a cheap hub. Ground-loop style buzz often disappears with that one change, which is cheaper than any filter.
🧰 The OBS filters that work
Right-click the mic in the Audio Mixer, choose Filters and add these in order:
- Noise Suppression: pick RNNoise for the best quality, or Speex if your PC is struggling. It reduces steady sounds like hiss and fans.
- Noise Gate: it mutes the mic between words. The defaults close at -32 dB and open at -26 dB, so adjust them until quiet gaps go silent without clipping the start of a word.
- Gain: a small boost after the filters, if your voice is still low.
If you have an NVIDIA GeForce RTX card, NVIDIA Broadcast offers a similar suppression tool, which can feed OBS as a virtual microphone.
🪟 Windows settings worth checking
Open the same Sound properties page and look at the Advanced and Enhancements tabs. Some drivers offer noise suppression or echo cancellation there, and turning one on can help a lot or make your voice sound watery, depending on the driver. Test it by recording a short clip and listening on headphones.
Also check that Windows is not using the wrong device. A laptop often has a built-in mic array that gets chosen after an update, so confirm your external mic is the default input. In Discord, Teams or Zoom, pick the mic there as well, since each app keeps its own choice.
🐕 Noise you only get at home
South African homes bring their own noise problems: dogs, lawnmowers, garden services, car alarms and rain drumming on a corrugated roof. A Noise Gate handles brief outbursts poorly, because it can only silence the mic between words. A dynamic microphone ignores distant sounds much better than a condenser, so it is the right swap if the noise keeps winning.
Shut the window, pick a quiet hour for the street outside, and put soft furnishings at your back. For more choice, browse the microphones category, and use streaming essentials for arms and stands that lift the mic away from desk vibration.
Frequently Asked Questions
Which OBS filters reduce mic noise?
Noise Suppression removes steady hiss and fan sound, Noise Gate silences the mic between words, and Gain evens out the level. Apply them in that order.
Why does my mic hear so much background noise?
Three things pull the room in: gain set too high, a mic sitting far from your mouth, and a sensitive condenser. Fix those before you lean on any filter.
Is a dynamic mic better at ignoring noise?
Generally. A dynamic capsule responds best to what is right in front of it, so far-off barking or traffic fades, whereas a condenser keeps the whole room in the recording.
How do I stop hiss and fan hum?
Turn the gain down, move the mic away from fans and chargers, and try the RNNoise option in OBS Noise Suppression.
Can Windows settings help?
Open the microphone properties and look for noise suppression under Enhancements, then set the input level near the middle. Results vary by driver.
Ready to cut the noise at its source?
Browse the Evetech microphone and streaming essentials categories for a close-pickup mic and a boom arm that keeps it clear of your desk.