Two voices, two mics and one table: to record podcast with 2 mics cleanly you need two separate inputs on the way into the computer, not two microphones fighting over one. An audio interface or small mixer with two mic inputs does that and gives each speaker their own track. With both gains matched and each mic close to its speaker, the edit later becomes far easier.

Quick Answer

Use an audio interface or mixer with two XLR inputs, two dynamic microphones and two XLR cables. Interfaces with two inputs start around R1,200 to R3,000, and good dynamic mics cost roughly R700 to R2,000 each. Record each person on a separate track, set both gains so peaks reach the upper-middle of the meter, and keep each mic about a hand-span from its speaker.

🔌 The kit: what actually connects to what

The cleanest chain is two XLR dynamic mics into the two inputs of an interface, then USB into the PC. Each input has its own gain knob, which means a quiet guest and a loud host can each be set correctly. Add headphones for both speakers if the interface has a second output, or use a headphone splitter.

Two USB mics sound like an easier route, but Windows often cannot combine two USB devices in one recording app cleanly, and the devices drift slightly out of sync. A shared XLR interface avoids that completely. Explore the microphones range for matched pairs.

🎛️ Setting levels and software

In Audacity, Reaper or OBS, create two audio tracks and assign input 1 to the first and input 2 to the second. Ask each person to talk in their normal voice, with a laugh or two, and set each gain until peaks reach about minus 12 to minus 6 dB with no red.

Name the tracks after the speakers straight away, such as Host and Guest, so the edit stays tidy when sessions pile up. Save the project before you hit record and again after each take, because a crash at the forty-minute mark is a miserable way to lose an interview.

Mute whoever is not speaking if the software allows, and record a short test with both talking at once to check bleed. If one voice appears on the other track, move the mics further apart and point them away from the other person.

🪑 Placing people and mics

Seat speakers side by side or at a slight angle, not face to face over one shared mic. Dynamic mics reject room sound and the other voice far better than condensers, so they suit a shared table in a lounge or spare room. Boom arms or desk stands keep the capsules in place and off the tabletop, which stops taps and elbow knocks reaching the recording.

Soft furnishings help in a Joburg or Pretoria flat with hard floors. A rug, a couch and curtains cut the echo, and you can find stands and arms in the streaming essentials category.

Before the first real episode, run a ten-minute rehearsal. Talk over each other, laugh, cough and tap the table, then listen back on headphones. This shows you which mic hears the other person, whether the table carries knocks and whether both gains were truly matched. Mark the knob positions with tape so every future session starts from the same place.

🌍 Adding a remote guest

For a guest in another city, use a call app that records locally on each side, then sync the files in your editor. Fibre keeps the call stable, while capped data or weak LTE causes dropouts, so ask the guest to record their own audio as a backup and send it afterwards. Agree a clap at the start of the call, because a sharp sound shows up on every track and lets you line the files up exactly when you edit. Wired headphones on the guest's side stop your voice looping back into their mic.

Frequently Asked Questions

What do I need to record two microphones?

An interface or mixer with two mic inputs and a pair of XLR cables. Two USB mics need extra software to record both at once.

Can I use two USB microphones on one PC?

Sometimes, but Windows may not mix two USB devices cleanly in one recording app. An interface with two XLR inputs is more reliable.

Dynamic or condenser for a shared table?

Dynamics reject room noise and bleed from the other speaker better, so they suit a shared room. Condensers need a quiet, treated space.

How do I stop one voice leaking into the other mic?

Place mics close and pointed away from the other person, and keep gains modest. Separate tracks let you clean overlaps afterwards.

Should each speaker record on a separate track?

Yes, if your software allows it. You can adjust levels and remove noise per person later.

Can I record a remote guest as well?

Yes, using a call app with local recording. Ask the guest to record locally too, in case their connection drops.

Ready to start your podcast? Check the Evetech microphone category for dynamic and XLR options, and pick up boom arms and accessories from the streaming essentials range.