The best ssd drive for ps4 is either a 2.5-inch SATA SSD swapped in as the internal drive, or a USB 3.0 SSD plugged in as extended storage. Neither turns a PS4 into a PS5, but both cut loading times and give the console room to breathe. This guide covers how to pick one and which route suits you.
Quick Answer
For a simple upgrade, buy a 1TB 2.5-inch SATA SSD, 7mm thick, and replace the internal drive, or buy a USB 3.0 SSD and format it as extended storage. The PS4's older SATA interface caps speed, so expect modest gains rather than miracles. A 1TB SATA SSD generally costs around R1,200 to R2,200.
🔌 Internal swap or USB drive?
Both routes work, and they suit different people.
Internal swap: the SSD replaces the stock hard drive. It is the neatest option, since there are no loose cables and the console is quieter. It means opening the drive bay and reinstalling the system software, which wipes the drive, so you must back up first.
USB extended storage: plug in a USB 3.0 drive, go to Settings > Devices > USB Storage Devices and format it as extended storage. You can then install games to it. It is quicker to set up, needs no screwdriver, and the drive can later move to a PS5 as storage for PS4 games and archived PS5 titles.
📏 What fits inside a PS4
The internal bay takes a standard 2.5-inch SATA drive. Sony's guidance limits the height to 9.5mm, and most SATA SSDs are 7mm, so they fit. The PS4 does not support M.2 NVMe sticks, so a fast NVMe drive is wasted money here.
The original PS4 and Slim use an older SATA interface that tops out around 300MB/s in practice. A drive that reads 3000MB/s on a PC will run far below that. This is why the biggest purchase mistake is overpaying for a high-end drive. A basic SATA SSD from a recognised maker is enough, and the Pro's faster interface changes the maths only slightly.
How the internal swap works
- Back up saves to a USB stick or online storage.
- Download the latest PS4 system software file from Sony's website and save it onto a USB stick, in a folder called PS4, then a subfolder called UPDATE, named PS4UPDATE.PUP.
- Switch the console off completely, unplug it and remove the drive bay cover. A single Phillips screw holds the drive.
- Slide the old drive out, move its mounting bracket across and fit the SSD.
- Plug in the USB stick, hold the power button until the second beep to enter Safe Mode, then choose Initialise PS4 (Reinstall System Software).
Afterwards, restore your saves, sign in and redownload games.
📶 Storage and data in South Africa
Large games routinely take 50GB or more. A 1TB drive holds around fifteen to twenty big titles. South African fibre makes redownloads easy, but if you use capped LTE they are expensive, so a larger drive pays for itself by reducing repeat downloads. Browse external SSDs if you prefer a plug-and-play route, or internal solid state drives for the swap.
Picking a drive without overspending
Look for a mainstream SATA SSD in the 500GB to 1TB range from a known maker. Sustained write speed and a controller from a reputable brand matter more than headline numbers, since a PS4 never pushes a drive anywhere near its limit. Skip DRAM-less bargain drives of unknown origin, because game installs involve long writes and cheap drives can slow down once their small cache fills.
For USB storage, check the drive connects over USB 3.0 or faster and draws power from the console port. A drive in an enclosure should have a firm cable, since a loose plug during a game install can corrupt the data. After formatting, the console shows the drive under Settings > Storage, where you can move installed games between system and extended storage.
A final tip for shared households on one fibre line, such as a Vuma or Openserve connection used by several people: download big games overnight, install them to the SSD once, and then leave them there. That avoids repeated peak-hour downloads when others are streaming.
Which should you pick?
Think about how long you plan to keep the console. A PS4 is an older machine, so spending heavily on its storage rarely pays back. A mid-priced 1TB SATA drive is the sweet spot, and a 500GB drive suits someone who plays two or three titles at a time. If you only play online shooters that update often, remember that patches also take space, so leave around 15 to 20 percent free. Games that stream large levels, such as open-world titles, benefit most from the SSD, while short arcade-style games barely notice. If a title stutters after the swap, rebuild the database from Safe Mode, which tidies the install without touching your saves.
If you are comfortable with a screwdriver and want the neatest result, swap the internal drive. If you want the least hassle or may buy a PS5 later, go USB. Either way, keep the old hard drive: it makes a handy backup for game installs and saves.
Frequently Asked Questions
Does an SSD make a PS4 load games faster?
A little. The older SATA interface caps speed, so gains are modest compared with a PC, but usually noticeable against the stock hard drive.
Should I swap the internal drive or use USB?
A swap replaces the stock drive and requires reinstalling system software. A USB 3.0 drive is simpler and needs no opening.
What size SSD fits inside?
A standard 2.5-inch SATA drive within the 9.5mm height limit. Check whether you have the original, Slim or Pro model.
Do I lose save data when swapping?
Not if you back up. Copy saves to a USB stick or online storage first, then restore them.
Can I use the same SSD on a PS5 later?
A SATA SSD will not fit the PS5's M.2 bay. In a USB enclosure it can store PS4 games.
How much storage do I need?
1TB gives room for many 50GB titles. On a capped line, bigger saves redownloading games you own.
Ready to give your PlayStation 4 more room?
Visit the solid state drive categories at Evetech to compare 2.5-inch SATA drives and portable USB storage for your console.