A security recorder writes video all day and night, so the right hard disk for Hikvision DVR is a surveillance-rated 3.5-inch SATA drive, sized from your camera count and how many days of footage you want. Check the maximum capacity your DVR supports before buying, because a larger drive may be refused or only partly used.

Quick Answer

Use a 3.5-inch SATA surveillance drive, often 1TB to 8TB, and prices climb with size, from around R900 up to about R4,500. Look up your recorder's maximum per bay in the manual first. Then size by cameras and resolution: more cameras, higher quality and constant recording all use space faster.

📹 Why a surveillance drive

A desktop drive expects to sit idle often. A DVR hammers it with several camera streams at once, around the clock. Surveillance drives are built for that constant write load, and they usually include firmware that keeps recording smooth when many streams arrive together.

Look for CMR, which stands for conventional magnetic recording, in the data sheet. Some desktop drives use SMR, which slows to a crawl under continuous writing and can drop frames. Plain rule: if the sheet does not say CMR or a surveillance model, choose another.

📏 Working out the right size

Start with the DVR's own limit, which is listed in its manual or on the maker's specification page for the model. Use only drives that fit within that figure.

Then do a rough sum. A single 1080p camera recording continuously at a moderate bitrate uses on the order of 20GB to 40GB per day. Four cameras for 30 days therefore needs several terabytes. Recording only on motion cuts that a lot, though busy scenes such as a street-facing gate still fill the disk. A free storage calculator from the camera maker removes guesswork.

🔌 Fitting and setting up

Power down the DVR, unscrew the case, and connect the SATA data and power cables from the board to the drive. Close it up, power on, then initialise the drive from the DVR's storage menu. The DVR formats it for its own recording, so never use a drive that holds files you want to keep.

Place the DVR in a ventilated spot. A cupboard under a roof in a Highveld summer gets hot, and heat is the quickest way to shorten drive life. Dust in a security room clogs vents, so wipe them now and then.

⚡ Protect the footage from power problems

Spikes and brownouts on the 230V supply can corrupt recordings or damage the drive, right when a break-in makes the footage matter. A surge-protected supply or small UPS keeps the DVR alive through short outages and cleaner shutdowns.

Shop the internal hard drives for fitted storage, or look at external hard drives if you copy clips off to share with your security company.

Frequently Asked Questions

Why use a surveillance drive instead of a desktop drive?

A DVR writes video around the clock. Surveillance drives are built for that load and for several streams at once, where a desktop drive wears faster.

How do I find my DVR's maximum drive size?

Look in the manual or on the maker's spec page for the supported capacity per bay. A larger drive may be refused or leave space unused.

How many days of footage will a drive store?

It depends on camera count, resolution, bitrate and whether you record on motion. Use a storage calculator for a realistic number.

Do I need to format the drive before using it?

Fit the drive, then initialise it from the DVR's menu. The DVR formats it for its own use, so do not use a drive holding files you want to keep.

Why does a DVR drive need protecting from surges?

Spikes on the supply can corrupt recordings or damage the drive. A surge-protected supply or small UPS keeps footage safe.

Is CMR important for a DVR?

CMR is the safe choice for 24/7 recording. Check the data sheet, since some desktop drives use SMR and slow down.

Ready to give your DVR room to record? See the Evetech internal hard drive category and choose a drive that matches your recorder's limits and your camera count.