Quick Answer
Yes. The RTX 5090 (32GB) runs Atomic Heart at 1440p at roughly 240 fps with high settings. Atomic Heart is an Unreal-engine FPS with heavy ray tracing and dense vegetation, and the 5090 is one of the few cards that keeps it above 60 fps at 1440p with ray tracing on.
RTX 5090 Atomic Heart Performance At 1440p
Expect roughly 240 fps from the RTX 5090 in Atomic Heart at 1440p. With DLSS and Frame Generation available on the 50-series, you can push frametimes even tighter or save power. Pair it with a 4K 240Hz or high-refresh 1440p panel so the 240 fps actually reaches your monitor.
Is The RTX 5090 Worth It For Atomic Heart?
If you game at 1440p and want maximum settings with full ray tracing, the RTX 5090 is the no-compromise choice and is currently stocked at Evetech. That said, an RTX 5080 or RTX 4080 SUPER also clears Atomic Heart comfortably at 1440p for a lot less, so step down a tier unless you specifically want 4K above 120 fps with everything maxed.
What To Pair With The RTX 5090
To avoid bottlenecking the 5090 in Atomic Heart, pair it with a Ryzen 7 9800X3D or equivalent, 32GB DDR5-6000, a 1000W or larger 80+ Gold PSU and a 4TB Gen4 NVMe SSD. A full RTX 5090 tower lands around R98,000 to R105,000 locally. Skimping on the CPU or power supply is the most common way SA builders waste a card this powerful.
FAQ
What FPS does the RTX 5090 get in Atomic Heart at 1440p?
Around 240 fps on high settings at 1440p. Frametimes stay stable, and DLSS can push it higher or lower power draw.
Do I need an RTX 5090 for Atomic Heart at 1440p?
Not necessarily. An RTX 5080 or RTX 4080 SUPER also handles Atomic Heart well at 1440p for noticeably less. Choose the 5090 only if you want the absolute ceiling at 4K with everything maxed.
What CPU pairs best with the RTX 5090 for Atomic Heart?
A Ryzen 7 9800X3D is the strongest pairing and avoids any CPU bottleneck at 1440p. Budget at least a 1000W 80+ Gold PSU and 32GB DDR5 to feed the card properly.
Quick check
Cap your framerate 3-5 fps below your monitor's refresh in Atomic Heart to keep frametimes flat, and enable DLSS only if you want lower power draw rather than more frames the panel cannot show.