If a wireless gaming headset upgrade is running below the refresh the screen supports, the cause is usually Windows defaulting low, a cable that cannot carry the rate, or a driver that did not apply the right mode. Worth restating for this exact case, since the details rarely transfer cleanly.

Quick Answer

Set the rate in Windows first: Advanced display settings, choose 144Hz, 165Hz, or 240Hz, apply. If the option is greyed out, the cable is the most common culprit, then the monitor's internal overclock or rate setting, then a GPU driver that needs a clean reinstall via DDU. Small as it sounds, it is the step most people rush past.

Enable the panel's own high-rate mode

Many monitors ship with their high-refresh or overclock mode switched off in the on-screen menu, and Windows can only offer rates the panel reports. Open the monitor menu, turn on the high-rate or OC option, save, then set the rate again in Windows. Adaptive sync or FreeSync settings live in the same menu and often need enabling for a smooth result. For an SA a wireless gaming headset upgrade setup, that is the cheapest, fastest move available.

Reinstall the GPU driver cleanly

A driver that updated badly can drop the mode list to 60Hz only. Remove the current driver with DDU in safe mode, then install the latest stable build for your card. After the reinstall, set the refresh in both Windows and the GPU control panel so the two agree, then reboot and confirm the rate held. This matters more on a wireless gaming headset upgrade than the spec sheet ever suggests.

FAQ

Does the cable really affect refresh rate?

Yes, heavily. Refresh rate depends on bandwidth, and an under-spec cable trains down to a safe 60Hz rather than failing outright. For 144Hz and above at 1440p, a DisplayPort 1.4 cable is the safe default and costs around R450 to R900. On a wireless gaming headset upgrade specifically, this step pays off more than any quick part swap.

Should I set the rate in Windows or the GPU control panel?

Set it in both so they agree. Windows Advanced display settings is the master, but the GPU control panel can override per-game, so a mismatch causes flicker or a drop back to 60Hz. Match them, then reboot to confirm. Treat a wireless gaming headset upgrade as its own case rather than copying a generic checklist.

Why does one monitor run high while the other stays at 60Hz?

Each display has its own refresh setting in Windows. Select the second monitor in Advanced display settings and raise its rate separately. A weaker cable or port on the second screen can also force it down to 60Hz. For a wireless gaming headset upgrade in a South African home, that margin is worth protecting.

Match the monitor to your frame rate Once the refresh is set correctly, shortlist Evetech panels whose refresh matches what your GPU delivers so you pay for frames you will actually see. For SA buyers especially, this is the practical detail that matters most.