Choosing between a tall air tower and a full liquid loop usually comes down to what your case can physically accommodate, more than any real performance gap between the two. Both options fit comfortably inside an atx mid-tower case built with enough clearance, which turns this into a genuine preference decision rather than one forced by hardware limits.
Quick Answer
Air cooling and 360mm liquid cooling both work well in the right case, with the choice usually coming down to noise preference and aesthetics rather than a clear performance winner. The EINAREX Pulse P100 supports both at R1,499, fitting air coolers up to 175mm tall or a full 360mm radiator up front.
Air Cooling: Simpler and Lower Maintenance
A tower air cooler up to 175mm tall fits without needing to plan tubing routes or worry about pump failure over the years. Installation is generally quicker, since there is no coolant loop to fill or bleed, and the upfront cost tends to sit lower than an equivalent liquid setup. The tradeoff is that very tall air coolers can sometimes brush against a side panel in cases with less headroom, though 175mm of clearance here covers the vast majority of tower coolers on the market.
Liquid Cooling: More Headroom, More Setup
A 360mm radiator mounted at the front takes advantage of the case's front liquid cooling support, offering strong thermal headroom for higher-heat components under sustained load. It does add more to the install process, including radiator fan wiring and confirming clearance against a graphics card, since the case also allows up to 330mm of GPU length. The three RGB fans that ship pre-installed may need repositioning if you choose this route, since the radiator typically claims the same front mounting space.
Making the Choice for Your Build
Neither option is objectively better across every build, since the right choice depends on how much you value simplicity against maximum cooling headroom. Full clearance figures for both routes are listed on the Pulse P100's listing, and if you decide air cooling suits you better, Evetech's case fan range has extra 120mm units worth adding for airflow around a tall tower. For other case models with different cooling support, Einarex's case lineup is worth a look before deciding.
Frequently Asked Questions
Can the EINAREX Pulse P100 fit both air and liquid cooling?
Yes, it supports air coolers up to 175mm tall and a 360mm radiator at the front.
Is 360mm liquid cooling always better than air cooling?
Not necessarily, it offers more thermal headroom for sustained heavy loads, but air cooling is simpler and needs less maintenance.
Do I need to remove the pre-installed fans for liquid cooling?
Usually yes, since a 360mm radiator typically occupies the same front mounting space as the stock fans.
Does a 360mm radiator affect GPU clearance?
It can slightly reduce usable space near the top of a long graphics card, so check clearance against the case's 330mm GPU limit.
Which option is cheaper to set up?
Air cooling is generally cheaper upfront, since there is no radiator, pump, or tubing to buy on top of the cooler itself.
Ready to weigh air cooling against a 360mm loop?
Scroll to the EINAREX Pulse P100 case in the Evetech gaming case lineup for R1,499 even. Pick the cooling route that suits your CPU and your budget.