Every new build runs into the same argument eventually: spend for the fans you want, the radiator you might add later, or the parts already sitting in your cart. Getting that order right on an atx mid-tower case spares you a rebuild six months down the line, since clearance is locked in the day you buy while fans and radiators can still change.

Quick Answer

Clearance comes first, radiator support second, and fan count last, since clearance is the one variable you cannot fix after delivery. The Antec NX410 covers all three for R1,199: 168mm of CPU cooler height, 165mm of PSU length, and mounting for a sizeable front radiator or a smaller one overhead.

📏 Clearance Decides Everything Else

Before fans or radiators even enter the conversation, check what your existing cooler, PSU and graphics card genuinely need. A tower cooler that stands too tall or a PSU with a long cable shroud will not care how many fan mounts a case advertises. This case lists 168mm of vertical room for air coolers and 165mm of depth for the power supply, covering most tower-style coolers and full-length modular units without a tape measure standoff on delivery day.

Why Clearance Matters More on a White Build

Light-coloured panels show up gaps and misaligned cabling far more readily than dark finishes do, so getting clearance right the first time keeps a white build looking tidy under the tempered glass panel this model ships with.

🌊 Radiator Support Is Your Future-Proofing

Once clearance checks out, radiator mounting decides whether an AIO upgrade is even on the table down the line. Supporting a large radiator at the front and a smaller one on the roof means air cooling is a starting point rather than a permanent ceiling, even if you begin with nothing more than stock fans.

🌀 Fan Count Is the Easy Fix

Fans are the cheapest, most reversible part of this whole decision. This case arrives with ARGB fans pre-installed and room for six in total, so a build can start light and fill the remaining mounts later from the case fan range without touching anything else. Browsing Antec's wider case lineup is worth doing too, to see how fan and radiator allowances scale across similar models.

Frequently Asked Questions

Should fan count outrank radiator support when choosing a case?

No. Fan mounts are simple to add or swap later, while radiator clearance is a structural limit fixed by the case itself, so radiator support should carry more weight.

Does this case fit a large radiator at the front and a smaller one on top at the same time?

Yes, both mounts can be filled together for builds that need the extra cooling surface.

What cooler height limit should I check before buying?

Keep any tower cooler under 168mm tall, the published clearance figure here.

Is 165mm of PSU room enough for a modular power supply?

Yes, that figure comfortably fits most standard ATX modular units along with their cable connectors.

Do the pre-installed fans need a separate controller?

No, the front panel includes an LED button, so basic lighting adjustment needs no extra hardware.

Ready to sort your build priorities first? Track down the Antec NX410 tower on Evetech's shelf for R1,199 out the door. Settle on fan count, radiator size and clearance before anything else.