If you see G-Sync compatible flickering on your monitor, the usual trigger is the frame rate dipping or jumping at the edge of the variable refresh range, which makes brightness wobble on some panels. Cap your frame rate two or three below the monitor's maximum refresh, use a good DisplayPort cable, and install a clean graphics driver. Those three changes calm most flicker without touching anything else.

Quick Answer

Variable refresh rate flicker comes from the refresh rate changing quickly, most often in menus, loading screens and low-fps moments. Set an fps cap 3 below your top refresh rate (for example 141 on a 144Hz screen), keep V-Sync on in the driver, and use a certified DisplayPort 1.4 cable. A replacement cable costs roughly R150 to R450.

🎞️ Why VRR Makes a Screen Flicker

Variable refresh rate lets the monitor change its refresh speed to match the game's frame rate. On many panels, especially VA and OLED, brightness and gamma shift slightly as the refresh rate falls. When the game bounces between 40 and 140 frames a second, the screen's brightness bounces with it, and you see flicker.

The effect is worst in menus and loading screens, where frame rates swing wildly or fall to very low values. Games with uncapped frame rates are the usual culprits, which is why capping often fixes it in one step.

Where the VRR window sits

Every monitor has a range in which adaptive sync works, for example 48 to 144Hz. Below the lower limit the screen cannot follow, and flicker or stutter appears. Many monitors use low framerate compensation to repeat frames below the range, but this can add its own brightness shifts on some panels.

🔧 Settings to Try in Order

Work through these one at a time and test after each:

  • Cap the frame rate to 3 below the maximum refresh rate, either in the game, or in the graphics driver control panel.
  • Keep V-Sync enabled in the driver, so the game never goes above the VRR range.
  • Turn off VRR in the game's menus if it flickers there, and turn it back on for play.
  • Open the monitor's on-screen menu and look for a VRR flicker, gamma or Adaptive-Sync option, since some models include one to reduce brightness shifts.
  • Disable background overlays and recording tools while testing.

If the flicker only happens in one game, that game's own frame pacing is probably at fault, and a driver or game patch may solve it. If it happens everywhere, look to the cable and the monitor.

🔌 Cable, Port and Driver Checks

A tired or low-grade DisplayPort cable may drop signal at high refresh rates, which looks like flicker or brief black frames. Swap to the cable that came with the monitor, or buy a certified DisplayPort 1.4 lead, and plug it straight into the graphics card rather than through an adapter. Keep the cable short, and avoid sharp bends.

Update the graphics driver with a clean install, which removes old settings, and restart. If flicker began after an update, roll back one version and compare. Also check for monitor firmware on the maker's support page, since some VRR fixes arrive there. Look through the range of gaming monitors if the panel itself is a poor match for adaptive sync.

🖥️ When the Panel Is the Cause

VA and OLED panels show more brightness change at low refresh rates than IPS, because their gamma shifts as the refresh rate falls. If you have done the steps above and still see flicker only in dim scenes, that is a panel trait and not a fault. Keep your frame rate steady and above 80, and the effect fades.

Also check for hardware problems: a loose power plug, a failing power brick or a surge-protected adaptor that has seen better days can cause flicker, so test with a different power lead if you can. The all gaming monitors page is a quick way to compare IPS options with a steadier VRR response.

Frequently Asked Questions

Why does my FreeSync monitor flicker in menus?

Frame rate swings wildly in menus, and VRR changes the refresh rate with it, shifting brightness on some panels. Capping fps or switching VRR off in menus steadies it.

Can a cable cause G-Sync flicker?

Yes. A worn or cheap DisplayPort cable can drop signal at high refresh rates. Try the supplied cable or a certified DisplayPort 1.4 lead.

Should I cap my frame rate for VRR?

Yes. Cap two or three frames below the maximum refresh rate so the game never leaves the VRR window, and keep V-Sync on in the driver.

Do I have to disable G-Sync to stop it?

That is a last resort, because you lose tear-free play. Try the cap, cable and driver first, then switch VRR off only in games that still flicker.

Is VA or OLED worse for flicker?

Both show more brightness shift when the refresh rate drops. The monitor's own VRR gamma option can lessen it.

Ready to enjoy smooth, steady gaming? If your monitor keeps flickering even after the fixes above, browse the gaming monitor range at Evetech and compare panels with strong variable refresh rate support.