Your PlayStation 5 fills up faster than you expect, and the fix is a small M.2 stick that slides into a bay under a cover on the console. That is the only way to get extra storage for PS5 that plays PS5 games straight from the drive. A USB drive helps too, but it only parks games you are not playing right now. The job takes about ten minutes and one screwdriver.
Quick Answer
Buy a PCIe Gen4 M.2 NVMe SSD, 1TB or 2TB, with a heatsink, and fit it in the console's expansion bay. Sony lists a capacity range of 250GB to 8TB and recommends sequential reads of 5,500MB/s or faster. A 1TB drive sits around R1,200 to R2,000, and 2TB around R2,200 to R4,000. A USB SSD in the R900 to R2,000 band suits archived games only.
🔧 What actually works in a PS5
The console has two kinds of extra storage, and they do different jobs. Mixing them up is the most common mistake.
The M.2 bay: plays PS5 games
The expansion slot takes a standard M.2 NVMe drive. Games installed here launch and run as if they sat on the internal drive. This is the option for your current library and for new releases that run to 100GB or more.
Sony's published rules cover four things:
- Interface: PCIe Gen4 x4 NVMe, in the M-key format.
- Speed: a recommended read speed of 5,500MB/s or higher. Slower drives may be refused or may cause stutter in some games.
- Size: the module is 22mm wide, and the bay takes lengths of 30mm, 42mm, 60mm, 80mm or 110mm. The 2280 size (80mm) is by far the most common.
- Cooling: a heatsink is required, and the total height with the sink must stay under about 11mm.
Sony can update these numbers, so read the current PlayStation support page for your console version before you pay. The original console and the slimmer revision look different on the outside, and the bay cover differs between them.
USB storage: archives only
A USB 3 SSD or hard drive plugged into the console stores PS5 games and plays PS4 games. To play a PS5 title you copy it back to the internal drive or the M.2 SSD. That is still useful, because a copy over USB takes minutes while a fresh download can take hours.
For readers in South Africa this matters. A 90GB game over a shared Openserve or Vuma fibre line during evening peak, or over capped LTE in a flat in Pretoria, can eat a week of data. Keeping finished games on a USB drive means you never download them twice.
🛠️ Fitting the SSD, step by step
Turn the console off fully, not rest mode, and unplug the power cable. Press the power button once more to bleed off any charge.
- Lay the console flat with the logo facing up on a soft cloth. Lift the side cover away from the corner, following the arrows for your model. Slide or lift according to the sticker on the cover.
- Unscrew the expansion bay cover, a small metal plate held by one screw. Keep the screw in a dish.
- Find the spacer screw sitting under a numbered hole. The numbers show the length of drive, so move the spacer to the hole that matches yours. For a 2280 drive that is the 80mm hole.
- Slide the SSD in at a slight angle until the gold contacts seat fully. Press it down flat and drive the spacer screw back in until the drive is held firm. Do not overtighten it.
- Refit the bay cover and side cover, plug the console in and switch it on.
The console then asks to format the new drive. This erases anything on it, which is fine for a new SSD. After formatting, it runs a quick speed test. A result under Sony's recommended figure tells you the drive is too slow, and you can move games to it only if the console accepts it.
Handle the drive by its edges. A bit of static from a synthetic jersey on a dry Highveld winter day can hurt an exposed circuit board, so touch a metal part of the case first.
Browse our internal SSD range and filter for NVMe drives in the capacity you want before you check the heatsink.
🌡️ Heat, size and how much to buy
Heatsinks
A Gen4 SSD runs hot, and the bay is a tight, poorly ventilated spot. Without a heatsink the drive slows itself down to protect the chips, and your loading times creep back up. Many drives are sold with a sink already fitted, and those are the easiest. A bare drive needs a separate Sony-compatible sink, one that fits under the bay cover.
Check the combined height before you buy. A tall gaming sink designed for a desktop motherboard often will not clear the cover. Coastal humidity in Durban or Cape Town is not a worry for a sealed drive, but Gauteng summer afternoons push the case temperature up, so a proper sink earns its place.
Capacity
Pick a size from your habits, not from the largest number on the shelf:
- 500GB: fits a few big titles. It fills up quickly if you play shooters or open-world games.
- 1TB: a comfortable starting point for most players, holding roughly ten large games.
- 2TB: suits anyone with a deep library or who plays many online titles and their patches.
- 4TB and up: only for collectors, and you pay a steep premium per terabyte.
Because you will download updates for years, buy one size up from what you think you need. Replacing a drive later means moving everything again.
What to ignore
A drive with a higher sequential write figure than Sony's listed minimum does not make games play better. Read speed counts for loading, and the console is the bottleneck above its own limit. Avoid spending extra for a drive rated well beyond the recommended read speed.
💾 Adding a USB drive as well
If your budget stretches only to one purchase, buy the M.2 SSD. If you have the money for both, add an external drive for archives.
Use a portable SSD over a USB 3 port on the back of the console. Format it through the console's settings, since it will then be reserved for the PS5. It will not read on a PC afterwards unless you reformat it, so keep your photos and documents on a different drive.
A portable external SSD is also quick to carry to a friend's house for a weekend session, because your games and saves travel with it. Cloud saves cover the saves, but not the game files themselves.
A spinning portable hard drive works for archives too and costs less per terabyte, but it is slower to copy and less tolerant of knocks.
Frequently Asked Questions
What kind of SSD does a PS5 need?
It needs a PCIe Gen4 M.2 NVMe drive in the 250GB to 8TB range that meets Sony's read-speed recommendation, with a heatsink fitted. Always compare against Sony's current published list, as the figures can change.
Can I play PS5 games from a USB drive?
No. A USB drive stores PS5 games and plays PS4 ones, but a PS5 title has to be copied to the internal drive or M.2 SSD to launch. Copying over USB is still far quicker than a fresh download.
How long does the installation take?
Most people finish in under fifteen minutes, including formatting. The slow part is moving your existing games across, which depends on how much you have installed and the speed of the new drive.
Do I need to buy a heatsink separately?
Only if the SSD does not come with one. The sink must fit the bay's height limit, so check the combined measurement before you buy rather than discovering the cover will not close.
Will a faster SSD make games run better?
Loading is quicker, and some titles use the speed to stream data, but a drive faster than Sony's figure brings little extra. Spend the difference on capacity.
How much storage is enough?
A 1TB drive holds a handful of big games, while 2TB suits a larger library. On capped South African LTE, the larger drive saves repeat downloads and the data they eat.
Ready to give your PS5 room for the whole library?
Browse the internal and external SSD ranges in our PC Components section and pick a size that matches your games.