When a pedal set creeps across the floor, the instinct is to buy something to hold it down. Before you do, go through the fixes in the order that costs least and tells you the most. In a Durban flat with carpet in the lounge, the cheapest fixes come first, and the sequence below works through them in that order.

Quick Answer

Start with the rubber feet and carpet grips already built into the Logitech G RS Pedals SE, then check the spot and the way the pile lies. Add a rubber-backed mat only if a firm push still moves the frame. The set carries a price of R2,799 including VAT at Evetech, and the mat is the cheapest part of the fix.

🧹 Clean the feet and the grips

Turn the set over and look at the feet. Grit, fluff and carpet dust collect in the rubber and reduce its grip faster than anything else. Wipe each foot with a damp cloth and let it dry fully before you put the set back down.

Check the carpet grips in the same way. Lint and hair can fill the grip pattern and leave the frame sitting on a film of fibre. A stiff brush and a few passes clear most of it.

Clean first, allow 10 minutes for the feet to dry, then test. A set that slides before cleaning and holds after is a common result in a busy lounge, and it costs nothing to check.

🧶 Read the pile before you move the set

Carpet pile lies in a direction, and a frame that sits across the lie holds differently from one that sits along it. Look at the carpet in good light and run a hand across it. The smooth direction is where the pile lies flat, and the rough direction is where it lifts.

Try the set in both directions. Hold it at each position for three hard stops from a 100 km/h run, and note whether the frame moves more in one direction. The position where it moves least is the one to use.

If the carpet is thin and the frame still walks, move the set to a place where the pile is deeper. A deep-pile patch in a lounge holds a set better than a worn area near a door.

🧽 Add a mat as the last step

If cleaning and repositioning do not stop the movement, add a rubber-backed mat. Choose one at least 5 cm bigger than the frame all round, and lay it flat under the whole footprint so the feet never sit on its edge.

Sit the set on the mat and run the three-stop test again. A mat that curls at one corner lets that corner lift under load, so press the edges flat before you test.

Keep the mat clean. Grit trapped under the rubber will reduce the grip over time, so lift the frame and wipe the mat every few weeks.

For the sim racing range and mounting options, our gaming desk range has stable surfaces to compare, and our simulation accessories and racing simulation categories show the wider gear.

Frequently Asked Questions

Does cleaning the feet really help?

Often, yes. Grit and fibre reduce the rubber's grip, and a clean foot holds better on the same carpet.

Which direction should the pedals face on carpet?

Test both directions with three hard stops. Use the position where the frame moves least.

How big should a mat be?

At least 5 cm bigger than the frame all round, so the feet sit fully on the rubber.

Want a set that stays put? Look at Evetech's gaming desks and simulation accessories, and find a base that holds your pedals steady.